CONVERTER, DC TO DC ORION-TR 24/12v 30 AMP
The Victron Energy Orion-Tr DC-DC Isolated Converter converts voltage from 24 to 12-Volt with a 30 amp and 360-Watt output and is IP43 protected
The remote on-off connector eliminates the need for a high current switch in the input wiring, the remote on-off can be operated with a low power switch or by the engine run/stop switch
IP43 protection – When installed with the screw terminals oriented downwards
All models are short circuit proof and can be paralleled to increase output current. Also high temperature protected, the output current will reduce at high ambient temperature
The screw terminals give the advantage of not needing any special tools for installation
Isolated Model – separate in and out (-) leads
Remote On/Off Terminal
The remote on/off terminal eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or for example the engine run/stop switch.
All Models Are Short Circuit Proof and Can Be Paralleled to Increase Output Current
An unlimited number of units can be connected in parallel.
High Temperature Protected
The output current will reduce at high ambient temperatures.
IP43 Protection
When installed with the screw terminals oriented downward.
Screw Terminals
No special tools are needed for installation.
Input Fuse (not replaceable)
On 12 V and 24 V input models only.
Adjustable Output Voltage
Not intended for battery charging (consider using an Orion-Tr Smart for battery charging).
Specifications:
- Input Voltage Range: 20-35 V
- Under Voltage Shut Down: 14 V
- Under Voltage Restart: 15 V
- Nominal Output Voltage: 12.2 V
- Output Voltage Adjust Range: 10-15 V
- Output Voltage Tolerance: +/- 0,2 V
- Output Noise: 2 mV rms
- Cont. Output Current at Nominal Output Voltage and 40 Degrees C: 30 A
- Maximum Output Current (10 S) at Nominal Output Voltage: 45 A
- Short Circuit Output Current: 60 A
- Cont. Output Power at 25 Degrees C: 430 W
- Cont. Output Power at 40 Degrees C: 360 W
- Efficiency: 88 %
- No Load Input Current (2): < 100 mA
- Current Consumption: < 200uA when disabled via its remote port
- Galvanic Isolation: 200 VDC between input, output, and case
- Operating Temperature Range: -20 to +55 Degrees C (derate 3 % per °C above 40 °C)
- Humidity: Max. 95 % non-condensing
- DC Connection: Screw terminals
- Maximum Cable Cross-Section: 16 mm² AWG6
- Weight: 1.3 kg (3 lb)
- Dimensions (H x W x D): 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inch)
- Safety Standards: EN 60950
- Immunity Standards: EN 61000-6-2, EN 61000-6-1, EN 55014-2
- Automotive Directive Standards: ECE R10-5
| | | | |
| 9936-215 | ORI241205200R | CONVERTER, 5 AMP 60 WATT | CAD $22.62 |
| 9936-216 | ORI241210200R | CONVERTER, 10 AMP 120 WATT | CAD $54.46 |
| 9936-217 | ORI241220200R | CONVERTER, 20 AMP 250 WATT | CAD $68.43 |
| 9936-422 | ORI241240110 | CONVERTER, 30 AMP 360 WATT | CAD $330.97 |