SEAPEX FLEXIBLE PIPING, RED 15MM O.D. 250 FT

Manufactured from high performance plastics and metals the 1/2″ flow size connectors are designed for use specifically with Seapex flexible pipe, plastic, brass, copper, and stainless tubing. They are used as a leak free connection with hot, cold, marine, and RV water systems. A leak free connection is made by simply pushing the Seapex piping into the fitting. An o-ring inside the connector seals on the outside of the piping while allowing the piping to rotate under full pressure. The connectors are intended to be used with potable water, beverage, fresh water, salt water, grey, and raw water. Neptune connectors are rated for pressures up to 100 PSI and temperatures of -40°F to +180°F.
1/2″ ID, 15mm OD flexible piping is produced from high-performance, cross linked polyethylene material. Seapex piping is the only marine grade piping product that is NSF listed, FDA recognized and available in multiple colours for ease of water line identification. Seapex provides the reliability of metal without corrosion and gains the flexibility of plastic with abrasion resistance. Seapex piping cutter is recommended for best results when cutting.
Operation Pressure: Vacuum to 160 PSI
Temperature Range: Max. 100 PSI at 180°F
Maximum: 160 PSI at 73°F
Minimum Burst Pressure: 215 PSI at 180°F, 480 PSI at 73°F
Standard Coil: 250′
NEPTUNE PIPE CONNECTORS